NeuroTrac® Continence

Other views | Download hi-res picture
Optional accessories compatible with this product
  • Suitable for urinary or rectal incontinence
  • Digital Dual Channel STIM unit
  • 9 Built in programmes for ease of use
  • 3 Customisable constant mode programmes
  • Ability to lock the unit
  • Records time in use and average current
  • User friendly
  • Compact, light and reliable
Read more:PDF
We are working on adding new tutorials and practical guides, please visit us later. Thanks for your patience.
  • Programme : P01 PAIN RELIEF
  • Programme : P02 URGE
  • Programme : P03 STRESS 1
  • Programme : P04 STRESS 2
  • Programme : P05 FREQ/URGE 1
  • Programme : P06 FREQ/URGE 2
  • Programme : P07 LACK OF SENSITIVITY [25 MIN]
  • Programme : P08 PELVIC FLOOR WORK OUT [60 MIN]
  • Programme : P09 BUILDING UP ENDURANCE
  • CUSTOMISED : PC1,PC2, PC3

Please read the Quick Start instruction which explains how to operate the unit, the basic functionality and troubleshooting:
NeuroTrac Continence - Quick Start and Troubleshooting (English)

Protocols Author Download
Stress Urinary Incontinence Anna Pawlaczyk Specialist in Gynecology
Prolapse: Pelvic Floor Muscle Training for Women Karen Radford, MSc, MCSP and Funmi Odofin, BSc, PG Cert. MCSP

STIM

  • Dual channel: individually isolated circuits.
  • Amplitude: 0 - 90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
  • Selectable pulse width: 50 μS - 450 μS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 Hz - 100 Hz [2% accuracy].
  • Time duration of the treatment selectable: 1 minute to 90 minutes.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
  • Ramp up time 0.3 - 9.9 seconds.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.

Physical dimensions: 119.2 x 69 x 28.7 mm

Weight: 0.07KG without battery, 0.1KG with battery.

Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
10 to +50 degrees Centigrade. 0-90% Humidity.

[Top]